Posts Tagged ‘Revel’

LAS VEGAS, Nevada – HARMAN’s Revel is showcasing its new top-of-the-line Ultima2 Series Rhythm2 powered subwoofer, featuring an 18-inch woofer, a massive 2,000 watts of amplifier power and built-in DSP room equalization to deliver the ultimate in deep bass reproduction in music and home theater systems.

“People expect the very best from Revel Ultima and our Rhythm2 was designed to exceed their expectations,” said Jim Garrett, Director of Marketing and Product Management, HARMAN Luxury Audio Group and Loudspeakers. “Although it can deliver prodigious amounts of deep bass, that’s only part of Rhythm2’s capabilities. Its built-in digital room EQ takes the contribution of the main speakers into account when measuring and adjusting the EQ of the subwoofer, which enables a system to achieve flatter and more accurate frequency response in any listening room.”

Measuring 24.6 inches high by 27.9 inches wide by 28 inches deep, the Revel Rhythm2 employs an 18-inch aluminum cast-frame front-firing woofer with a 4-inch diameter by 1.75-inch long Xmax voice coil, and a high-power neodymium-magnet motor system with a symmetrical magnetic field configuration that reduces distortion and dynamic compression to a minimum. The Rhythm2’s 2,000-watt amplifier (RMS; 4,000 watts peak) provides power to drive the woofer to over 115dB without strain and deliver authoritative bass down to below 20 Hz.

The Rhythm2’s DSP parametric equalization takes its sonic accuracy in a “2.1 stereo” or multichannel system to a level not possible with conventional subwoofers. Every room has frequency response dips and peaks, especially below 300 Hz, that can detract from a subwoofer’s (or loudspeaker’s) performance. The Rhythm2’s built-in DSP compensates for these room-related irregularities by applying a corresponding inverse target EQ curve to achieve more accurate in-room low-frequency response.

The EQ takes into account not just the output from the subwoofer but the combined low-frequency output from the subwoofer and the main speakers. This is because the main speakers and not just the subwoofer have a major impact on a system’s overall low-frequency response. The Rhythm2’s EQ adjusts the subwoofer’s EQ such that the combination of the subwoofer and the main speaker’s output is optimized. The result is greatly improved realism for music and movie soundtracks with cleaner, more articulate bass. The Rhythm2’s PC or Mac-based software provides flexible and precise room correction.

The Rhythm2 offers a full complement of controls and connections including a fully configurable electronic crossover with adjustable delays, volume, line- level inputs, a USB input to connect a PC or Mac and more. The subwoofer is designed to provide a seamless sonic blend with other Revel Ultima2 Series loudspeakers and is finished in high-gloss piano black and mahogany to perfectly match other Revel Ultima2 Series loudspeakers in appearance as well as sound quality.

The Revel Rhythm2 powered subwoofer will be available in February 2013 at a suggested retail price of $10,000.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets — supported by 15 leading brands, including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson®. The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,900 people across the Americas, Europe and Asia, and reported net sales of $4.4 billion for year ended June 30, 2012.

Tags: , , ,
Posted in Consumer Electronics Technology, Harman Luxury Audio, Professional Audio Technology, Revel | Comments Off

HARMAN’s Revel Performa3 Loudspeakers Lineup Now Shipping

LAS VEGAS, Nevada – HARMAN’s Revel today announced its Performa3 loudspeakers are now shipping. The Revel Performa3 Series is a complete range of home theater and music loudspeakers that incorporates significant engineering and aesthetic enhancements to the original Performa Series to deliver extraordinary music and movie soundtrack reproduction.

The nine models in the Performa3 line include the following:

• F208 3-way floorstanding tower (1-inch tweeter, 5.25-inch midrange, dual 8-inch woofers)
• F206 3-way floorstanding tower (1-inch tweeter, 5.25-inch midrange, dual 6.5-inch woofers)
• M106 2-way bookshelf monitor (1-inch tweeter, 6.5-inch woofer)
• M105 2-way bookshelf monitor (1-inch tweeter, 5.25-inch woofer)
• C208 3-way center channel (1-inch tweeter, 4-inch midrange, dual 8-inch woofers)
• C205 2-way center channel (1-inch tweeter, dual 5.25-inch woofers)
• S206 2-way surround speaker (dual 1-inch tweeters, dual 6.5-inch woofers)
• B112 powered subwoofer (12-inch woofer, built-in 1000-watt amplifier)
• B110 powered subwoofer (10-inch woofer, built-in 400-watt amplifier)

Complementing their industry-leading value and performance, Revel Performa3 loudspeakers are stunning in appearance, with a choice of high-gloss walnut or piano black finishes that are overseen by master Italian craftsmen for unparalleled quality. Models F206, M105 and C205 are also available in high-gloss piano white. Model S206 is only available in matte black.

“Our Revel Performa loudspeakers have earned rave reviews from audiophiles since their initial introduction,” said Jim Garrett, Director, Marketing and Product Management for HARMAN Luxury Audio and Loudspeakers. “We have made a number of advancements in loudspeaker materials and manufacturing technologies that we are now able to incorporate into the upgraded Performa3 models. We are confident that listeners will be thrilled with the improvements in sonic performance and musical accuracy.”

To achieve their superior sound quality, Revel Performa3 loudspeakers deploy proprietary drivers throughout. The 1-inch aluminum-dome tweeters deliver airy, extended high-frequency response to beyond 20 kHz, with superlative detail and clarity. The tweeters operate into an exclusive patent-pending Acoustic Lens Waveguide that is precisely shaped using an entirely-new mathematical approach. These new waveguides result in an utterly seamless transition from the midrange to tweeter; greatly enhancing the sense of reality and musicality.

The midrange and low-frequency drivers employ aluminum cones and sophisticated motor systems for extraordinary resolution with low distortion. The cones have integral ribs that add strength and rigidity without added mass, resulting in very low distortion for more natural vocal and instrumental reproduction. The drivers incorporate additional refinements including cast-aluminum frames and efficiently vented, high-power motor structures, to deliver the same superb sonic character over an extraordinarily wide dynamic range.

The F208 and C208 also feature a tweeter level control that allows the speakers’ high-frequency balance to be fine-tuned, and a boundary control, which enables the speakers to be tailored to individual room acoustics and placement positions.

The enclosures are built to the highest standards, with bracing at critical locations and curved side panels that minimize cabinet-induced coloration. The three-way models feature individual sub-enclosures for the midrange drivers for maximum midrange clarity and definition.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets — supported by 15 leading brands, including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson®. The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,900 people across the Americas, Europe and Asia, and reported net sales of $4.4 billion for year ended June 30, 2012.

Tags: , , ,
Posted in Consumer Electronics Technology, Harman Luxury Audio, Professional Audio Technology, Revel | Comments Off

HARMAN’s Revel Showcases 2-Series In-Wall and In-Ceiling Loudspeakers at CES 2013

LAS VEGAS, Nevada – At CES 2013, HARMAN’s Revel is showcasing its 2-Series in-wall and in-ceiling loudspeakers, an all-new line of custom installation-ready models that combine exceptional performance with outstanding value and easier installation.

The seven speakers in the Revel 2-Series include the following:

• C263 in-ceiling speaker (1-inch tweeter, 6-1/2-inch woofer)
• C283 in-ceiling speaker (1-inch tweeter, 8-inch woofer)
• C263LP low-profile in-ceiling speaker (1-inch tweeter, 6-1/2-inch woofer)
• C283LP low-profile in-ceiling speaker (1-inch tweeter, 8-inch woofer)
• W263 in-wall (1-inch tweeter, 6-1/2-inch woofer)
• W283 in-wall speaker (1-inch tweeter, 8-inch woofer)
• W253L horizontal/vertical in-wall LCR speaker (1-inch tweeter, dual 5-1/4-inch woofers)

“Our new 2-Series architectural speakers offer superb sound quality at attractive price points that represent a new value standard for Revel,” said Jim Garrett, Director of Marketing and Product Management for HARMAN Luxury Audio Group and Loudspeakers. “In addition, the speakers feature our newly-designed C-2 mounting system that accommodates 2-inch material thickness and provides greater installation flexibility.”

Revel 2-Series speakers offer expanded installation options for every in-wall and in-ceiling application. All models, with the exception of the C263LP and C283LP low-profile solutions, employ the company’s new C-2 dog-leg-type clamping mechanism that quickly and securely locks the speakers into place and can be used with materials up to 2 inches thick. All feature zero-bezel magnetically removable paintable grilles for a clean, elegant appearance that blends into any room. All 2-Series speakers fit into existing pre-construction brackets and fire-rated back box accessories.

The C283LP and C263LP low-profile in-ceiling speakers have a mounting depth of only 2.35 inches (60 mm), enabling them to fit in applications where installation space is limited. The W253L LCR speaker can be used as the left, center and right-channels in a multichannel home theater system and can be mounted horizontally or vertically. The in-ceiling models come with both round and square grilles to match ceiling fixtures and lighting.

Revel 2-Series loudspeakers incorporate premium drivers and components to deliver clear, detailed and natural sound. The PEI Dome Tweeters operate in conjunction with a computer-designed waveguide that provides smooth, even coverage over a wider listening area and a more seamless blend between the tweeter and the woofer. The woofers utilize aluminum cones to provide detailed and dynamic midrange reproduction.

Revel 2-Series architectural speakers will be available in the first quarter, 2013.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets — supported by 15 leading brands, including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson®. The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,900 people across the Americas, Europe and Asia, and reported net sales of $4.4 billion for year ended June 30, 2012.

Tags: , , ,
Posted in Consumer Electronics Technology, Harman Luxury Audio, Professional Audio Technology, Revel | Comments Off

HARMAN’s Revel Introduces 2-Series In-Wall and In-Ceiling Loudspeakers at CEDIA 2012

INDIANAPOLIS, Indiana – HARMAN’s Revel today announced the introduction of its 2-Series in-wall and in-ceiling loudspeakers, an all-new line of custom installation-ready models that combine exceptional performance with outstanding value and easier installation.

The seven speakers in the Revel 2-Series include the following:

  • C263 in-ceiling speaker (1-inch tweeter, 6-1/2-inch woofer)
  • C283 in-ceiling speaker (1-inch tweeter, 8-inch woofer)
  • C263LP low-profile in-ceiling speaker (1-inch tweeter, 6-1/2-inch woofer)
  • C283LP low-profile in-ceiling speaker (1-inch tweeter, 8-inch woofer)
  • W263 in-wall (1-inch tweeter, 6-1/2-inch woofer)
  • W283 in-wall speaker (1-inch tweeter, 8-inch woofer)
  • W253L horizontal/vertical in-wall LCR speaker (1-inch tweeter, dual 5-1/4-inch woofers)

“Our new 2-Series architectural speakers offer superb sound quality at attractive price points that represent a new value standard for Revel,” said Jim Garrett, Director of Marketing and Product Management for HARMAN Luxury Audio Group and Loudspeakers. “In addition, the speakers feature our newly-designed C-2 mounting system that accommodates 2-inch material thickness and provides greater installation flexibility.”

Revel 2-Series speakers offer expanded installation options for every in-wall and in-ceiling application. All models, with the exception of the C263LP and C283LP low-profile solutions, employ the company’s new C-2 dog-leg-type clamping mechanism that quickly and securely locks the speakers into place and can be used with materials up to 2 inches thick. All feature zero-bezel magnetically removable paintable grilles for a clean, elegant appearance that blends into any room. All 2-Series speakers fit into existing pre-construction brackets and fire-rated back box accessories.

The C283LP and C263LP low-profile in-ceiling speakers have a mounting depth of only 2.35 inches (60 mm), enabling them to fit in applications where installation space is limited. The W253L LCR speaker can be used as the left, center and right-channels in a multichannel home theater system and can be mounted horizontally or vertically. The in-ceiling models come with both round and square grilles to match ceiling fixtures and lighting.

Revel 2-Series loudspeakers incorporate premium drivers and components to deliver clear, detailed and natural sound. The PEI Dome Tweeters operate in conjunction with a computer-designed waveguide that provides smooth, even coverage over a wider listening area and a more seamless blend between the tweeter and the woofer. The woofers utilize aluminum cones to provide detailed and dynamic midrange reproduction.

Revel 2-Series architectural speakers will be available in the first quarter, 2013.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets – supported by 15 leading brands, including AKG, Harman Kardon, Infinity, JBL, Lexicon and Mark Levinson. The company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 20 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,400 people across the Americas, Europe and Asia, and reported sales of $4.4 billion for the fiscal year ended June 30, 2012.

Tags: , , , ,
Posted in Consumer Electronics Technology, Harman Luxury Audio, Professional Audio Technology, Revel | Comments Off

HARMAN’s Revel Finalizes Its Performa3 Loudspeakers Lineup, Sets Ship Date

NORTHRIDGE, California – HARMAN’s Revel today announced that it has finalized the models, specs and availability of its upcoming Performa3 loudspeakers. The Revel Performa3 Series is a complete range of home theater and music loudspeakers that incorporates significant engineering and aesthetic enhancements to the original Performa Series to deliver extraordinary music and movie soundtrack reproduction.

The nine models in the Performa3 line include the following:

* F208 3-way floorstanding tower (1-inch tweeter, 5.25-inch midrange, dual 8-inch woofers; SRP: $5,000/pr)
* F206 3-way floorstanding tower (1-inch tweeter, 5.25-inch midrange, dual 6.5-inch woofers; SRP: $3,500/pr)
* M106 2-way bookshelf monitor (1-inch tweeter, 6.5-inch woofer; SRP: $2,000/pr)
* M105 2-way bookshelf monitor (1-inch tweeter, 5.25-inch woofer; SRP: $1,500/pr)
* C208 3-way center channel (1-inch tweeter, 4-inch midrange, dual 8-inch woofers; SRP: $2,000/ea)
* C205 2-way center channel (1-inch tweeter, dual 5.25-inch woofers; SRP: $1,000/ea)
* S206 2-way surround speaker (dual 1-inch tweeters, dual 6.5-inch woofers; SRP: 1,800/pr)
* B112 powered subwoofer (12-inch woofer, built-in 1000-watt amplifier; SRP: $3,000/ea)
* B110 powered subwoofer (10-inch woofer, built-in 400-watt amplifier; SRP: $2,000/ea)

Complementing their industry-leading value and performance, Revel Performa3 loudspeakers are stunning in appearance, with a choice of high-gloss walnut or piano black finishes that are overseen by master Italian craftsmen for unparalleled quality. Models F206, M105 and C205 are also available in high-gloss piano white. Model S206 is only available in matte black. All Performa3 passive loudspeakers will be available in December 2012, with both subwoofers available in early 2013.

“Our Revel Performa loudspeakers have earned rave reviews from audiophiles since their initial introduction,” said Jim Garrett, Director, Marketing and Product Management for HARMAN Luxury Audio and Loudspeakers. “We have made a number of advancements in loudspeaker materials and manufacturing technologies that we are now able to incorporate into the upgraded Performa3 models. We are confident that listeners will be thrilled with the improvements in sonic performance and musical accuracy.”

To achieve their superior sound quality, Revel Performa3 loudspeakers deploy proprietary drivers throughout. The 1-inch aluminum-dome tweeters deliver airy, extended high-frequency response to beyond 20 kHz, with superlative detail and clarity. The tweeters operate into an exclusive patent-pending Acoustic Lens Waveguide that is precisely shaped using an entirely-new mathematical approach. These new waveguides result in an utterly seamless transition from the midrange to tweeter; greatly enhancing the sense of reality and musicality.

The midrange and low-frequency drivers employ aluminum cones and sophisticated motor systems for extraordinary resolution with low distortion. The cones have integral ribs that add strength and rigidity without added mass, resulting in very low distortion for more natural vocal and instrumental reproduction. The drivers incorporate additional refinements including cast-aluminum frames and efficiently vented, high-power motor structures, to deliver the same superb sonic character over an extraordinarily wide dynamic range.

The F208 and C208 also feature a tweeter level control that allows the speakers’ high-frequency balance to be fine-tuned, and a boundary control, which enables the speakers to be tailored to individual room acoustics and placement positions.

The enclosures are built to the highest standards, with bracing at critical locations and curved side
panels that minimize cabinet-induced coloration. The three-way models feature individual sub-enclosures for the midrange drivers for maximum midrange clarity and definition.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets – supported by 15 leading brands, including AKG(r), Harman Kardon(r), Infinity(r), JBL(r), Lexicon(r) and Mark Levinson(r).  The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,000 people across the Americas, Europe and Asia, and reported net sales of $4.3 billion for the twelve months ended March 31, 2012.

Tags: , , ,
Posted in Consumer Electronics Technology, Harman Luxury Audio, Professional Audio Technology, Revel | Comments Off

© 2013 Definition Branding & Marketing